Dose 2016

Relevant references

Allahverdi, M., A. Nisbet, et al. (1999). "An evaluation of epoxy resin phantom materials for megavoltage photon dosimetry." Phys Med Biol 44 (5): 1125-1132. Araki, F., Y. Hanyu, et al. (2009). "Monte Carlo calculations of correction factors for plastic phantoms in clinical photon and electron beam dosimetry." Med Phys 36 (7): 2992-3001. Fujita, Y., N. Tohyama, et al. (2010). "Depth scaling of solid phantom for intensity modulated radiotherapy beams." J Radiat Res 51 (6): 707-713. Hill, R., Z. Kuncic, et al. (2010). "The water equivalence of solid phantoms for low energy photon beams." Med Phys 37 (8): 4355-4363. Ma, C. M., S. B. Jiang, et al. (2003). "A quality assurance phantom for IMRT dose verification." Phys Med Biol 48 (5): 561-572. Ma, C. M. and J. Li (2011). "Dose specification for radiation therapy: dose to water or dose to medium?" Phys Med Biol 56 (10): 3073-3089. McEwen, M. R. and D. Niven (2006). "Characterization of the phantom material virtual water in high- energy photon and electron beams." Med Phys 33 (4): 876-887. Ramaseshan, R., K. Kohli, et al. (2008). "Dosimetric evaluation of Plastic Water Diagnostic-Therapy." J Appl Clin Med Phys 9 (2): 2761. Seuntjens, J., M. Olivares, et al. (2005). "Absorbed dose to water reference dosimetry using solid phantoms in the context of absorbed-dose protocols." Med Phys 32 (9): 2945-2953. Tello, V. M., R. C. Tailor, et al. (1995). "How water equivalent are water-equivalent solid materials for output calibration of photon and electron beams?" Med Phys 22 (7): 1177-1189.