IMRT

Take Home Message

Radiotherapy and Oncology 67 (2003) 129–141 l 6DOF positioning with 6DOF tables

www.elsevier.com/locate/radonline

Quality assurance of a system for improved target localization and patient set-up that combines real-time infrared tracking and stereoscopic X-ray imaging

Dirk Verellen * , Guy Soete, Nadine Linthout, Swana Van Acker, Patsy De Roover, Vincent Vinh-Hung, Jan Van de Steene, Guy Storme

Department of Radiotherapy, Oncologic Center, Academic Hospital, Free University of Brussels (AZ-VUB), Laarbeeklaan 101, B-1090 Brussels, Belgium

Received 5 December 2001; received in revised form 11 October 2002; accepted 25 October 2002

Abstract Background and purpose : The aim of this study is to investigate the positional accuracy of a prototype X-ray imaging tool in combination with a real-time infrared tracking device allowing automated patient set-up in three dimensions. Material and methods : A prototype X-ray imaging tool has been integrated with a commercially released real-time infrared tracking device. The system, consisting of two X-ray tubes mounted to the ceiling and a centrally located amorphous silicon detector has been developed for automated patient positioning from outside the treatment room prior to treatment. Two major functions are supported: (a) automated fusion of the actual treatment images with digitally reconstructed radiographs (DRRs) representing the desired position; (b) matching of implanted radio opaque markers. Measurements of known translational (up to 30.0 mm) and rotational (up to 4.0 8 ) set-up errors in three dimensions as well as hidden target tests have been performed on anthropomorphic phantoms. Results : The system’s accuracy can be represented with the mean three-dimensional displacement vector, which yielded 0.6 mm (with an overall SD of 0.9 mm) for the fusion of DRRs and X-ray images. Average deviations between known translational errors and calculations varied from 2 0.3 to 0.6 mm with a standard deviation in the range of 0.6–1.2 mm. The marker matching algorithm yielded a three- dimensional uncertainty of 0.3 mm (overall SD: 0.4 mm), with averages ranging from 0.0 to 0.3 mm and a standard deviation in the range between 0.3 and 0.4 mm. Conclusions : The stereoscopic X-ray imaging device integrated with the real-time infrared tracking device represents a positioning tool allowing for the geometrical accuracy that is required for conformal radiation therapy of abdominal and pelvic lesions, within an acceptable time-frame. q 2002 Elsevier Science Ireland Ltd. All rights reserved. Workfl w ith stereoscopic x-rays and 6DOF positioning achieves sub-millimeter and sub- degree accuracy

Keywords: Automated patient positioning; Intra-fractional correction of three-dimensional set-up errors; Infrared markers; Stereoscopic X-ray imaging

Int. J. Radiation Oncology Biol. Phys. 2012;82(5):1627-1635

Radiotherapy and Oncology 2003;67:129-141

59

1. Introduction

alities, the patient positioning procedures should follow with equal pace and should, ideally, be integrated in the